1 Essentially, modems enable the encoding of _
*Protocol Data
*Analog Data
*Modulated Data
*Digital Data
*Protocol Data
*Analog Data
*Modulated Data
*Digital Data
2 Which of the following options is a technique that transmits
signals from several sources over a single communication
channel?
*Channeling
*Multiplexing
*Switching
*Modulating
*Multiplexing
*Switching
*Modulating
3 Generally, transmission and advertisement alternate in time
on the same __
*Channel
*Frequency
*Layer
*Bit
*Frequency
*Layer
*Bit
4 The network interface layer is particularly concerned with the
protocols that access the _ networks
*Intermediate
*Integrated
*Internal
*International
*Integrated
*Internal
*International
5 In the area of computer networks, the acronym TDM refers to
the _
*Transmission Development Multiplexing
*Total Division Multiplexing
*Time Development Multiplexing
*Time Division Multiplexing
*Total Division Multiplexing
*Time Development Multiplexing
*Time Division Multiplexing
6 Which of the following options has a signal intensity that
varies in a smooth fashion over time?
*Continuous Signal
*Bidirectional Signal
*Traversal Signal
*Multiple Signal
*Continuous Signal
*Bidirectional Signal
*Traversal Signal
*Multiple Signal
7 The layer that handles the transfer of information across
multiple networks through the use of gateways of routers is
the _
*Session Layer
*Application Layer
*Transport Layer
*Internet Layer
*Session Layer
*Application Layer
*Transport Layer
*Internet Layer
8 Fundamentally, an electromagnetic signal consists of many
__
*Frequencies
*Protocols
*Tonnes
*Bytes
*Protocols
*Tonnes
*Bytes
9 In the field of computer networks, the acronym UTP stands
for __
*Unshielded Twisted Protocol
*Unshielded Tainted Pair
*Unshielded Twisted Pair
*Unshielded Twisted Poll
*Unshielded Tainted Pair
*Unshielded Twisted Pair
*Unshielded Twisted Poll
10 In order to transmit digital signals on an analog __, each
interface must contain digital signals.
*Channel
*Network
*Router
*Link
*Channel
*Network
*Router
*Link
11 Which of the following options is employed in transporting
a raw bit stream from one machine to another?
*Protocol layer
*Application layer
*Transportation layer
*Physical layer
*Protocol layer
*Application layer
*Transportation layer
*Physical layer
12 LANs usually depend on their own hardware for __
*Transmission
*Interaction
*Polarisation
*Integration
*Transmission
*Interaction
*Polarisation
*Integration
13 The purpose of a__ is to connect nodes across an
Internetwork.
*Router
*Swsh
*Channel
*Ping
*Router
*Swsh
*Channel
*Ping
14 There are __ official standards for Full–Duplex Ethernet
*Three
*Ten
*No
*Two
*Three
*Ten
*No
*Two
15 Routers are hardware and topology- __
*Liable
*Dependent
*Based
*Independent
*Liable
*Dependent
*Based
*Independent
16 In computer _, 1 bps may occupy roughly 1 Hz of _
*Networks
*Bands
*Swishes
*Frequency
*Networks
*Bands
*Swishes
*Frequency
17 To transmit digital signals on an analog network, each
interface must contain __
*Protocols
*Bits
*Wavelets
*Electronics
*Protocols
*Bits
*Wavelets
*Electronics
18 In computer networks, 1 bps may occupy roughly 1 Hz of _
*Wavelet
*Bandwidth
*Megabyte
*Frequency
*Wavelet
*Bandwidth
*Megabyte
*Frequency
19 The cable commonly used for digital transmission is the _
video, over large __
*50–ohm cable
*40–ohm cable
*60–ohm cable
*30–ohm cable
*50–ohm cable
*40–ohm cable
*60–ohm cable
*30–ohm cable
20 In standard television cabling, the coaxial cable system
uses the __
*Diaphragm Transmission
*Analog Transmission
*Protocol Transmission
*Digital Transmission
*Diaphragm Transmission
*Analog Transmission
*Protocol Transmission
*Digital Transmission
Comments
Post a Comment
DROP YOUR COMMENTS HERE.....